Due to the popularity of the original idea, I decided build something a bit more robust and portable. I wanted something that would be battery powered so I could practice on my phone, using a portable key, almost anywhere in the world. Therefore I designed the system where plugging in the jack switches the unit… Continue reading Morse-It BLE Full Package
Category: Amateur Radio
Morse-it BLE Hardware CW Key
*Link to the more complete project This project utilizes (at minimum): An iOS device with Bluetooth LE capabilities Morse-it Adafruit Feather 32u4 Bluefruit LE And a physical CW key of your choice. Various bits of wire and a micro USB cable Soldering iron and solder, wire strippers and other basic electronics tools. Procedure Update the… Continue reading Morse-it BLE Hardware CW Key
Icom IC-7300 and EasyPal PTT
First setup your Icom IC-7300 as described here. Find the COM Port for the Radio in Device Manager (that’s in control panel): Then in EasyPal, open the PTT Settings: Set your settings to look like below, make sure to change the COM port to what your system is using. Also, make sure to Save the… Continue reading Icom IC-7300 and EasyPal PTT
Icom IC-7300 Connector Settings
I’ve had a few people ask about the data settings that I use for the ICOM IC-7300. I’ve decided it’s just easier to post them here. Menu->Set->Connectors Setting ACC/USB Output Select AF ACC/USB AF Output Level 42% ACC/USB AF Squelch OFF(Open) ACC/USB AF Beep/Speech Output OFF ACC/USB IF Output Level 80% ACC MOD Level 50%… Continue reading Icom IC-7300 Connector Settings