I’ve had a few people ask about the data settings that I use for the ICOM IC-7300. I’ve decided it’s just easier to post them here.
| Menu->Set->Connectors | Setting |
| ACC/USB Output Select | AF |
| ACC/USB AF Output Level | 42% |
| ACC/USB AF Squelch | OFF(Open) |
| ACC/USB AF Beep/Speech Output | OFF |
| ACC/USB IF Output Level | 80% |
| ACC MOD Level | 50% |
| USB MOD Level | 60% |
| DATA OFF MOD | MIC, ACC |
| DATA MOD | USB |
| External Keypad | – |
| CI-V | See Below |
| USB Serial Function | CI-V |
| CI-V Settings | Setting |
| CI-V Baud Rate | Auto |
| CI-V Address | 94h |
| CI-V Transcieve | ON |
| CI-V USB->Remote Transceive Address | 00h |
| CI-V Output (for ANT) | OFF |
| CI-V USB Port | Unlink from [REMOTE] |
| CI-V USB Baud Rate | 115200 |
| CI-V USB Echo Back | OFF |
How do you effectively get the radio to talk to wsjt-x and sync with the pw1 and wsjt and pa uses different hex addresses
From my understanding, WSJT-X PWR output is only the audio level sent from the program to the rig’s internal soundcard. If you want to adjust the PA output, you’ll need to use a different application that works with CAT control.